Martin Exterior Dot-HP Pro

Overview

The Martin Exterior Dot-HP Pro is a bright, outdoor-rated RGBW Dot, designed to create media facades or perimeter lighting on large buildings and structures for long-distance viewing. Each Exterior Dot-HP Pro is colour- and brightness-calibrated for superior visual consistency across the entire installation. Exterior Dot-HP Pro is controllable via Martin P3 System Controllers or any sACN or Art-Net-based controller.

It is the perfect solution for integrating LED video technology into façades, landmarks, architectural elements or any other structure, indoors or out. The Exterior Dot-HP Pro comes with hybrid In/Out connectors for easy and versatile installations options.

Mapping video onto Exterior Dot-HP Pro is quick and intuitive via the P3 System Controller, eliminating the need for complex setups and time-consuming addressing. Each Exterior Dot-HP Pro includes 16 RGBW LEDs with a total luminous intensity of 90 candela.

Unifying unparalleled performance, adaptability, and intuitive operation, the Exterior Dot Pro family doesn’t just enable lighting designers and professionals to surpass the limitations of traditional systems, it inspires them to redefine the boundaries of creative video design.

Features

Powerful, connector-based, direct-view LED lighting
Powered directly from Martin P3 PowerPort or third-party 48 VDC PSU
Large footprint of 78 mm diameter with clear front or diffused dome.
Perfect for façade or stage integration
Fully-weatherised housing (IP67, IK08 and C-5 High corrosion rating)
Martin P3/Art-Net/sACN compatible (automatic protocol detection)
Setup and Addressing via RDM over Art-Net or Martin P3
Real-time status feedback via RDM over Art-Net and Martin P3
Individually-controllable RGBW Dots
Colour boost for bright, saturated, and mixed colours
Dedicated colour temperature control channel
In-built Effect Macros (FX) for easy creation of stunning looks
Up to 75 Exterior Dot-HP Pro units can be daisy-chained
Reduced power mode for longer cable runs and fixture counts
Combined power/data input over single cable (hot-pluggable)
Superior colour and brightness consistency based on factory calibration
Stand-alone programming with up to 20 scenes
Intuitive mapping and addressing via P3 System Controller family
Shipped in FSC-certified cardboard packaging
5-year warranty

Specifications

Physical

Diameter: 78 mm (3.1 in.)
Weight: 395 g (0.86 lbs.)
Height with clear front: 43 mm (1.7 in.)
Height with dome front: 58 mm (2.3 in.)

Control and Programming

Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
Control Protocols: Martin P3, Art-Net or sACN
Protocol detection: Automatic
Setting and addressing: Martin P3 System controller or RDM (over Art-Net)-compliant controller
RDM: ANSI/ESTA E1.20
DMX Modes: Standard, Extended, Raw, RGB or PixelMap
DMX channels: 6, 12, 4, 3, 48
Fixture Identification: User-settable ID number
Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
sACN Compliance: ANSI E1.31 – 2016
Martin P3 Compliance: P3 System Controller Software 6.0.3 or newer
Ethernet Transceiver: 10/100Mbit
Firmware update: Via Ethernet using Martin Companion / P3 System Controller

Optics

Light source: 16 x RGBW LEDs
Minimum LED lifetime: 100,000 hours (to >70% luminous output)*
LED manufacturer: LumiLeds
Binning: Tight colour and flux binning
Calibration: Full Gamut Colour Calibration

*Figure obtained under manufacturer's test conditions at Ta 25°C

Photometric Data

CRI (Colour Rendering Index) : > 70
Colour resolution: 16 bits per colour (64 bit per pixel)
Dot pitch: 78 mm - 500 mm (fixture to fixture)
Colour Temperature: 2,000 – 12,000 K
Viewing angle: (clear front) 150°, (diffused dome) 180°

* Dot pitch can be extended using hybrid DCE cables.

Luminous Intensity

Full@6500K: 90 cd (clear front), 56 cd (diffused dome)

Luminous Output*

Full@6500K: 260 lm (clear front), 175 lm (diffused dome)
Red: 80 lm (clear front), 55 lm (diffused dome)
Green: 230 lm (clear front), 155 lm (diffused dome)
Blue: 60 lm (clear front), 40 lm (diffused dome)

* Dot pitch can be extended using hybrid DCE cables
** All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient

Connections

Input: DCE connector cable tail for Power & data input, IP67
Output: DCE connector cable tail for Power & data thru, IP67
Connection: Hot-pluggable
Max. daisy-chain (Full Mode) : 75 fixtures including 50 m cable
Max. daisy-chain (Half power mode):
120 fixtures including 50 m cable

* Refer to system diagram for details on fixture run limitations.