Si series single mode optical MADI card

Soundcraft Si series Cat5 MADI card

Cat5 MADI card for Si Series consoles

RRP ex VAT: £704.17
SKU: SCR0528

Cat5 MADI card for Si Series consoles

Soundcraft Si Series Multi-Digital Card

Firewire, USB and ADAT card for Si Series consoles

RRP ex VAT: £350.00
SKU: SCR0569

Firewire, USB and ADAT card for Si Series consoles.

The Multi Digital card is a great tool to add recording functionality to the Si consoles. It provides a 32x32 USB interface, and a 32x32 FireWire interface. In addition, there are 8 channels of optical ADAT in and out available on the card.

Soundcraft Si series AES 4in/4out (XLR) card

An XLR-based card for Si Series consoles with 2 pairs of AES/EBU inputs and outputs (4-in/4-out).

RRP ex VAT: £724.17
SKU: SCR0525

An XLR-based card for Si Series consoles with 2 pairs of AES/EBU inputs and outputs (4-in/4-out).

Soundcraft Si series AES 8in/8out (DSub) card

A D-Type connector based AES/EBU input/output card for Si Series consoles with 8 inputs and 8 outputs.

RRP ex VAT: £724.17
SKU: SCR0526

A D-Type connector based AES/EBU input/output card for Si Series consoles with 8 inputs and 8 outputs. A separate BNC connector for wordclock output is provided.

Soundcraft Si Series Aviom 16ch output card

Aviom interface card for Si Series console.

RRP ex VAT: £1,790.83
SKU: SCR0527

Aviom interface card for Si Series console.

This card allows the desk to digitally feed an Aviom A-Net® Pro-16 chain. 16 mono signals can be fed to any number of Aviom personal mixers (such as the A-16 II), connected in a daisy chain configuration. The A-Net® card will be the start of the chain and provide the audio and synchronization data to the chain. DIP switches on the front panel allow grouping two adjacent channels to one stereo channel, and generating a test tone.

Soundcraft Si Series Cobranet 32ch i/o card

CobraNet interface card for Si Series consoles.

RRP ex VAT: £1,790.83
SKU: SCR0529

CobraNet interface card for Si Series consoles.

This card allows sending and receiving of up to 32 audio channels to/from a CobraNet® network. DIP switches on the card allow setting the number of input or output channels seen by the console. Default setting is 32 output and no input channels. By default, the module is configured to be the conductor (synchronization master) and can be configured using the free CobraNet Discovery application to match your requirements.